Ho aggiornato Nero, ma niente.
Questo è il log che mi da:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18.35.34
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS10 - HA 3 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TSSTcorp DVD-ROM TS-H352A>Version: TS04 - HA 3 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160M0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 3 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp DVD-ROM TS-H352A D: CDRom0
TSSTcorp CD/DVDW TS-H552B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522988kB)
Free physical memory: 332MB (340836kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.7.2005
ISO compilation
19.54.08 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
19.54.08 #2 Text 0 File Reader.cpp, Line 127
Reader running
19.54.08 #3 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552B running
19.54.08 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
19.54.08 #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
19.54.08 #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1807567 (401:40.67, 3530MB)
19.54.08 #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
19.54.08 #8 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
19.54.08 #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19.54.08 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1807568 (1807568) = #1807568/401:40.68
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1807568 blocks [TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------
19.54.08 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3701899264, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1807568 | lead-out | 1 | 0x41 | 0x00
19.54.08 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
19.54.15 #13 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
19.54.15 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
19.54.15 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 8x (11.080 KB/s)
19.54.15 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19.54.15 #17 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode for Multisession
19.54.15 #18 Text 0 File Mmc.cpp, Line 21627
Set BUFE: Super Link -> ON
19.54.15 #19 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: No
19.54.15 #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
19.54.26 #21 Text 0 File Cdrdrv.cpp, Line 1288
19:54:26.046 - TSSTcorp CD/DVDW TS-H552B\H3 T1 : Queue again later
20.01.25 #22 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 1807568 (1B94D0h), lenght 0 blocks
20.01.25 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20.01.26 #24 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was 1807567
20.01.32 #25 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out
20.02.04 #26 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 8x (11.080 KB/s)
20.02.05 #27 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11.080 KB/s)
20.02.05 #28 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20.02.05 #29 CDR -1066 File ThreadedTransferInterface.cpp, Line 1733
Invalid field in command
20.02.05 #30 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1733
Invalid track info
20.02.05 #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11.080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 12.02.00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 7.59.42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)